No results were found for the filter!
PTFE-Centering Tip
PTFE centering tips Centering tips made of PTFE for pre-center funnels. They are inserted into the end of a steel tube and thus simplify the targeted stacking of two mold halves. This is only a replacement part for existing pre-center...
For price information, please sign in.
C100 Refresher
C100 Refresher: Is a reactivating solution specifically for the C66 coating (Edelweiss) to recreate the lost release properties of the C66 coating. this is how it is done: carefully rub the approx. 50 - 60°C warm tool with a soaked...
For price information, please sign in.
Flange Scraper PA6
This plastic flange scraper was specially developed for removing material residues from mould flanges or parting lines. Especially for this application, the injection-moulded glass-fibre reinforced polyamide (PA6 GF) used is extremely...
For price information, please sign in.
Silicone sealing cord
Silicone cord as flange seal. Required for processing liquid materials such as PVC, liquid nylon, etc. - ∅ 3 x 1.5mm per meter (requires an Ω - shaped groove in the flanges)
For price information, please sign in.
Maus Plastic-Demoulding tools
Professionelles Entformungs-Sortiment Keile aus hochfestem Kunststoff, verursachen keine Kratzer Verschiedene Formen für Arbeiten an Formwerkzeugen Ob Entgraten, Hebeln, Ziehen, oder Säubern. Mit diesem Set meistern Sie fast alle...
For price information, please sign in.
Hand scraper
Praktisches Entgratwerkzeug für Kunststoffteile. Dieses Werkzeug ist leicht in Hand und Handhabung. Der Vorteil gegenüber herkömmlichen Entgratwerkzeugen liegt in der Klinge. Sie bietet eine breite Auflagefläche für Stabilität und ist...
For price information, please sign in.
Thermopaste syringe 10g
Thermopaste - A non setting, high thermally conductive paste used for installation of Heat-Pipes. Provides the all-time necessary contact between the Heat-Pipe and mould surface allowing the heat (during cooking) and cold (during...
For price information, please sign in.
Setral high-temperature oil
SHT 260 MT - Aerosol can with fully synthetic, high temperature resistant oil used for lubricating all movable parts of moulds and/or machine which are exposed to contact with temperatures up to 250 o C. Most efficient lubrication...
For price information, please sign in.
Air-Jector
Air-Jector This is a pneumatic demolding aid that is used on planar surfaces in the mold. The plate, which has a diameter of 35 mm, presses against the part to be demolded from the inside with a 35 mm stroke and thus lifts it out of the...
For price information, please sign in.
Drop boxes
Standard Dropboxes (insulated stainless steel container with lid, inner surface with permanent release coating, pneumatic cylinder for operating the Maus-Hole plunger).
For price information, please sign in.
Manual "push" ejector
Manual ejector This is a manual demolding aid that is used on planar surfaces in the mold. The plate, which has a diameter of 35 mm, presses against the part to be demolded from the inside with a 35 mm stroke and thus lifts it out of the...
For price information, please sign in.
Flange-Scraper
Flange scraper Simple plastic flange scraper for removing plastic residues from mold partitions between production cycles. Gentle on molds and especially on coatings.
For price information, please sign in.
Viewed