PTFE-Tube
Product number:
1.004.710
Product information "PTFE-Tube"
each 1 meter
Login
Accessory Items
Maus-Dome
Mouse Dome
is a single-direction venting technology especially for large rotational moulds with a high material input. This venting can accelerate the sintering process, improve the surface finish of the parts and ultimately shorten cycle times.
The Mouse Dome is made of temperature resistant silicone and is designed to be easily clipped onto a suitable Teflon adapter. The Teflon adapter, on the other hand, can be installed on the steel vent pipe which typical are used for venting of large moulds.
The stable dome shape also withstands big powderpools and prevents the material from escaping through the venting process, while still ensuring unobstructed ventilation during the cooling phase.
Due to the internal application principle, the Maus Dom can provide maintenance-free venting for up to 50 and more cycles (depending on PIAT and oven time).
The mouse dome is also ideally suited for applications with internal air cooling.
Intellivent
Intellivent
is an one-direction venting technology for rotational moulds, that will speed up the sintering process, improving parts surface finish, not restricting parts shrinkage and ultimately reducing cycle times.
The Intellivent is the latest addition to the Supa- and Smartvent family, and as those is especially designed for working in a rotational mould and are produced from a heat-resistant, flexible polymer.
Unlike Supa- and Smartvent the new Intellivents cannot be installed right to the mould wall, but require an installment inside a specially prepared PTFE tube. Such prepared PTFE tubes can be sourced through us, or with the use of a “Intellicutter” can be prepared accordingly on sight.
This combination of materials reduces the size and cost of the vent while making it more robust.
The patented Intellivent technology is available in two (2) sizes, for application in PTFE tubes with an ID of either 19mm, or 39mm.
Why Intellivent?
· Simple to install and use
· Reduces scrap rates, cycle time and production cost per cycle
· Repeatable venting conditions, improving process control
· Will not get affected by large shot weight / powder pool
· Avoids part-line blowhole problems
· Easy to incorporate into pressurization systems
One-Way Breathers (Filters)
filter-vents
is a one way venting technology for small rotational molding that accelerates the sintering process, improves the surface finish of parts, does not restrict part shrinkage, and ultimately shortens cycle times.
The filter vent is intended as a disposable solution and needs to be replaced after every cycle.
easy installment, easy replacement
The Ø 7.8mm filter is stuck directly into a hole in the mould wall (or Teflon pipe).
After each cycle, the filter is pulled out and replaced with a new one
The Ø 15mm filter is intended only as a plug for a matching Teflon tube.
The filter is hidden in the tube and not exposed to direct heat.
Reproducibility, no deviating breathing properties from cycle to cycle
most cost-effective venting solution
"