Intellivent

Product information "Intellivent"

Intellivent

 

ist eine Ein-Richtung-Entlüftungstechnologie für Rotationsformen, die den Sinterprozess beschleunigt, die Oberflächenbeschaffenheit der Teile verbessert, die Schrumpfung der Teile nicht einschränkt und letztendlich die Zykluszeiten verkürzt.

Das Intellivent ist die neueste Ergänzung der Supa- und Smartvent-Familie. Sie wurde speziell für den Einsatz in einer Rotationsform entwickelt und wird aus einem hitzebeständigen, flexiblen Polymer hergestellt.

Im Gegensatz zu Supa- und Smartvent können die neuen Intellivents nicht direkt an der Formwand, sondern müssen in einem speziell vorbereiteten PTFE-Rohr installiert werden. Solche vorbereiteten PTFE-Rohre können selbstverständlich durch uns bezogen werden oder mit einem "Intellicutter" vor Ort entsprechend vorbereitet werden.

Diese Materialkombination reduziert Größe und Kosten der Lüftungsschlitze und macht sie robuster.

Die patentierte Intellivent-Technologie ist in zwei Größen erhältlich und kann in PTFE-Rohren mit einem Innendurchmesser von 19 mm oder 39 mm eingesetzt werden.

 Warum Intellivent?

• Einfach zu installieren und zu verwenden

• Reduziert Ausschussraten, Zykluszeit und Produktionskosten pro Zyklus

• Wiederholbare Entlüftungsbedingungen zur Verbesserung der Prozesskontrolle

• Wird nicht durch großes Schussgewicht / Pulverpool beeinträchtigt

• Vermeidet Blasenbildung im Flanschbereich

• Einfache Integration in Drucksysteme

 

0 of 0 reviews

Leave a review!

Share your experiences with other customers.


Similar Items

Supavent
Supavent is a one-direction venting technology for medium sized rotational moulds, that will speed up the sintering process, improving parts surface finish, not restricting parts shrinkage and ultimately reducing cycle times. The vents are especially designed for working in a rotational mould and are produced from a heat-resistant, flexible polymer. They only require an appropriate hole drilled in the mould wall to be installed. That makes these vents fantastically easy to apply to mould and to use in production. However to increase the lifespan of Supavents we recommend to install the vents inside an insulative sleeve such as PTFE tube or similar. (see our specially made retainers for Supavent sizes) The patented Supavent technology is available in two (2) sizes, for application on either 13, 19 or 25mm holes. A carefully designed slit down the long side of the Supavent will allow air to easily enter into the mould but does not allow it to escape. These radical breakthrough vents will not require any packing material such as steel wool or others, making venting of the rotational mould a reliable and consistent operation. Why Supavent? ·         Simple to install and use ·         Reduces scrap rates, cycle time and production cost per cycle ·         Repeatable venting conditions, improving process control ·         Does not restrict par shrinkage ·         Avoids part-line blowhole problems ·         Easy to incorporate into pressurization systems  

Maus-Dome
Mouse Dome is a single-direction venting technology especially for large rotational moulds with a high material input. This venting can accelerate the sintering process, improve the surface finish of the parts and ultimately shorten cycle times. The Mouse Dome is made of temperature resistant silicone and is designed to be easily clipped onto a suitable Teflon adapter. The Teflon adapter, on the other hand, can be installed on the steel vent pipe which typical are used for venting of large moulds. The stable dome shape also withstands big powderpools and prevents the material from escaping through the venting process, while still ensuring unobstructed ventilation during the cooling phase. Due to the internal application principle, the Maus Dom can provide maintenance-free venting for up to 50 and more cycles (depending on PIAT and oven time). The mouse dome is also ideally suited for applications with internal air cooling.

Smartvent
Smartvent is a one-direction venting technology for small to medium sized rotational moulds, that will speed up the sintering process, improving parts surface finish, not restricting parts shrinkage and ultimately reducing cycle times. Smartvents, like its bigger brother the Supavent, are especially designed for working in a rotational mould and are produced from a heat-resistant, flexible polymer. Having a shorter profile and height, Smartvents are ideal for application in smaller, shallower moulds or even in tight spots or kissed-off sections in a rotational mould. They only require an appropriate hole drilled in the mould wall to be installed. That makes these vents fantastically easy to apply to mould and to use in production. However to increase the lifespan of Smartvents we recommend to install the vents inside an insulative sleeve such as PTFE tube or similar. (see our specially made retainers for Smartvent sizes) The patented Smartvent technology is available in four (4) sizes, for application on either 8mm, 13mm or 19mm holes. The carefully designed slits on the dome end of the Smartvents will allow air to easily enter into the mould but does not allow it to escape. These radical breakthrough vents will not require any packing material such as steel wool or others, making venting of the rotational mould a reliable and consistent operation. Why Smartvent? ·         Simple to install and use ·         Reduces scrap rates, cycle time and production cost per cycle ·         Repeatable venting conditions, improving process control ·         Does not restrict par shrinkage ·         Avoids part-line blowhole problems ·         Easy to incorporate into pressurization systems  

Accessory Items

PTFE-Tube
each 1 meter